Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Highland Park, TX
Chimney inspection in Highland Park is the starting point for almost every job we take on here, because the town’s fireplace stock is old and layered: 1910s to 1930s masonry chimneys, many with clay flue tiles that have been patched or relined at some point, sitting behind Tudor, Colonial, and Mediterranean facades the town works hard to protect. Add short, intense cold snaps that load creosote fast and a heavy pecan and elm canopy that drops debris into caps all summer, and you get chimneys that need a trained eye, not a quick brush. Call (833) 246-4886 to book an inspection and we’ll tell you what your flue is actually doing.
Why Highland Park Homes Are Different
The chimneys in Highland Park are older than most of the people who live in them, and that changes the work. A large share of the housing stock went up between the 1910s and 1930s, and many homes carry multiple masonry fireplaces. Plenty still run on original clay tile flues or on tiles that were patched decades ago. Newer rebuilds around town often keep the decorative chimney and add a modern liner behind it, so two houses on the same block can need completely different treatment.
North Texas summers are long and hot, and the winters are mild but uneven. Fireplaces here get used hard during short cold snaps, then sit idle. That pattern builds creosote quickly and in layers, and it also means summer downdrafts pull leaves and twigs down onto caps and spark arrestors under the mature pecan and elm canopy. Then there’s the masonry itself. Chimney exteriors on these homes often match the historic brick of the facade, and some caps are original cast-stone or copper. Sweeping and repair work has to protect that brick and those caps, not just clean the flue.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Highland Park Services
Two jobs come up again and again for Highland Park homeowners: keeping an old flue clean and safe, and fixing the masonry and liner problems that age and hard use expose.
Chimney Sweep in Highland Park
In Highland Park, a sweep starts with protecting the historic exterior. We lay drop cloths and work carefully around original cast-stone and copper caps and brick that matches the house facade, because a stain on that masonry is a real problem, not a cosmetic one. The sweep itself removes creosote and debris from the flue, clears leaves and twigs off the cap and spark arrestor, and gets you a clear look at what shape the flue is in. After short, hard cold snaps, creosote here tends to build up in dense layers rather than thin ones. To book, see chimney sweep.

Chimney Repair in Highland Park
Repair work in Highland Park usually involves masonry and liners at the same time. Cracked clay tiles, spalling mortar joints, a cap that’s pulling loose, or a damper that no longer seals all show up on these older homes, and the fix has to respect the original chimney design. We work with HeatShield for ceramic flue restoration when the tiles are damaged but the chimney structure is sound, and with DuraFlex liner systems when a full reline is the honest answer. Cap replacement and exterior components often come from Olympia Chimney or Famco. Details are on our chimney repair page.

Chimney Inspection in Highland Park
The reason inspection comes first in Highland Park is simple: the flues here are old enough that surface appearance tells you almost nothing. A 1920s clay tile flue can look fine from the firebox and be cracked, offset, or thinly patched a few feet up. Short cold snaps push heavy fireplace use into a few weeks, so creosote loads build fast, and summer downdrafts under the tree canopy pull debris onto caps that haven’t been checked since the last owner lived here. A proper chimney inspection gives you documented evidence of what’s inside the flue and on the exterior, and that’s what tells you whether the chimney is safe to burn or needs work first. We tell you exactly what we found, what it means, and what fixing it involves.
Chimney Flue Inspection
Signs you need it
You need a flue inspection if you’ve had a long gap since the last one, notice a smoky smell or weak draft when the fireplace is cold, see cracked or missing tile in the firebox, or have just bought a Highland Park home and have no record of what was done before.
What it costs in Highland Park
A chimney flue inspection in Highland Park typically runs $99 to $250, with a Level 2 video inspection generally falling in the $150 to $350 range.
How we do it
We run a camera down the flue from the top, photograph and note every joint, offset, and patched section, and check the cap, spark arrestor, and exterior brick from the roofline so the report covers the whole chimney, not just the inside.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is what you want after a home purchase, a chimney fire, a change of fuel or appliance, or any flue repair, since it goes further than a basic visual check.
What it costs in Highland Park
Level 2 chimney inspections in Highland Park typically cost $150 to $350, and the written estimate sets the final price once we know what the camera finds.
How we do it
We inspect every accessible part of the chimney and venting with video, check the attic and crawl space where the flue passes through, and photograph the findings so you can see what we saw.
What Chimney Inspection Costs in Highland Park
| Item | Typical range in Highland Park |
|---|---|
| Basic chimney inspection | $99 – $250 |
| Level 2 video inspection | $150 – $350 |
| Camera inspection and photo report | $150 – $350 |
Do I really need a camera inspection, or is a visual check enough?
For an older Highland Park flue, a camera inspection is usually the right call. Clay tiles that have been patched, offset, or cracked often look fine from the firebox, and only the video shows what’s actually there.
How often should a Highland Park chimney be inspected?
Once a year is the standard, and more often if you burn heavily through cold snaps or notice draft problems. Call (833) 246-4886 and we’ll book an inspection and give you an exact quote.
Brands We Service in Highland Park
We work with a defined lineup of professional chimney brands: DuraFlex for flexible liner systems, HeatShield for ceramic flue restoration, and Gelco and Olympia Chimney for caps and venting components. Materials matter as much as labor, which is why we name them. We don’t stock parts in Highland Park; we order per job once the inspection tells us what’s needed. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Highland Park, TX
| Service | Typical range in Highland Park |
|---|---|
| Basic chimney inspection | $99 – $250 |
| Level 2 video inspection | $150 – $350 |
| Camera inspection and photo report | $150 – $350 |
In Highland Park, price climbs with access and condition: a complex chimney on a steep-pitch roof, multiple fireplaces in one home, or a flue that needs camera work past a patched section all push the range. We agree on a flat price before we book, and the written estimate is what sets the final number.
Neighborhoods We Serve in Highland Park
We work across Highland Park, from the blocks near the town’s historic core to the streets tucked under the mature pecan and elm canopy. Homes in Highland Park are close together and the streets are tight, so we book by area and keep our arrival windows honest. One response-time note for the whole area: when you call, we tell you the next available slot, and you’re booked for that window rather than left guessing. If a call comes outside dispatch hours, we book it into the next opening, Sunday through Friday, 7am to 7pm.
- Near the historic town center
- Streets adjoining University Park
- The older Tudor blocks north of Mockingbird
- Homes along the Preston Road corridor
Service Area – Cities Near Highland Park
Highland Park sits inside the Park Cities, and we also take chimney work in the towns around it. If you’re just outside the Highland Park line, we cover University Park, TX, Mesquite, TX, Balch Springs, TX, and Hutchins, TX. Call (833) 246-4886 and we’ll confirm your address falls in the area before we book.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Highland Park
We book inspections into the next available opening, and for Highland Park that’s usually within a few days. Call (833) 246-4886 and we’ll give you a firm slot. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Highland Park has strict architectural review, and exterior changes to a chimney can fall under it, so ask the town before any visible masonry or cap work. We’ll tell you what’s involved on our side; the town sets the permit and review rules.
Yes, we cover all of Highland Park, from the historic center to the streets bordering University Park. If you’re unsure whether your address qualifies, call and we’ll confirm before booking.
If your Highland Park chimney hasn’t been looked at in a while, or you’ve noticed draft issues, odors, or visible damage on the exterior, the next step is a documented inspection. Call (833) 246-4886 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Terrence Jackson"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Ruben Vargas"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Oscar Flores