Chimney Repair in Mesquite, TX | Mesquite Chimney Sweep

Chimney Repair in Mesquite - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Mesquite Homeowners

When a chimney starts to fail, it rarely announces itself. You notice a stain on the ceiling after a rain, a cap that’s gone crooked, or mortar crumbling at the crown. Masonry repair in Mesquite is something we handle as part of our Mesquite Chimney Sweep service, alongside sweeping and inspection, so you’re not handed off between vendors when a problem gets found. Our technicians have up to 12 years of experience, and we work with a defined lineup of professional-grade brands including DuraFlex, Olympia Chimney, and Copperfield. We tell you exactly what we found, what it means, and what fixing it involves. Same-day service is available when the schedule allows. Call (833) 246-4886 to book.

Call (833) 246-4886

Chimney Cap Installation

Chimney Cap Installation means fitting a new cap over the flue opening to keep rain, birds, and debris out of the chimney while still letting smoke escape. It’s the right job when your chimney has no cap at all, or when you’re moving into a Mesquite home where a prior owner never bothered. A cap is one of the cheapest ways to prevent water intrusion, which matters in a climate that swings between long dry spells and heavy spring rainfall. A cap alone falls in a modest range, and adding a full custom cap with spark screen can cost more depending on the flue count and material. We use Famco and Olympia Chimney components for cap work, and the written estimate sets the final price.

Single-Flue and Multi-Flue Caps

A single-flue cap is a straightforward fit over one opening. A multi-flue cap spans the whole crown and covers several flues at once, which is common on larger masonry chimneys in Mesquite. We measure the crown first, so the cap sits level instead of resting on the masonry.

Stainless and Copper Options

Stainless steel holds up to weather and stays structurally sound for the long haul. Copper develops a patina over time and is chosen for appearance as much as protection. Either material works; the decision usually comes down to budget and how visible the chimney is from the street.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement is the job of pulling a rusted, dented, or loose cap and putting a properly fitted new one in its place. Rusted screens and warped tops are common in Mesquite because a cheap cap won’t survive years of sun and rain. A cap that’s come loose lets water run straight down the flue and can leave animals free access to the chimney. Our process starts with a check of the crown and flue top, since a new cap set on a cracked crown solves nothing. Replacement work runs in a modest range for standard sizes and climbs with custom fabrication and multi-flue designs. We use Famco and Olympia Chimney parts for the install, and the written estimate sets the final price.

Spotting a Failing Cap

A cap that’s tilted, rusted through, or missing its screen has already stopped doing its job. Loose fasteners and gaps at the edge let water and birds in. If you see daylight through the screen from below, it’s due for replacement.

What Changes in the Swap

We pull the old cap, inspect the flue tile edges, and clean any debris that collected underneath. Setting a new cap level on the crown is the part most quick installs get wrong. We fasten it down properly so the next windstorm doesn’t shift it.

Chimney Liner Installation

Chimney Liner Installation is the process of running a new flue liner inside the chimney to contain heat and combustion gases. It’s needed when the original clay tile is cracked, when there’s no liner at all, or when a gas appliance has been converted and the old flue is the wrong size. A failing liner is the concern that matters most in Mesquite, because cracks let heat reach nearby wood and allow carbon monoxide into living space. Relining is not a DIY job; the components carry combustion and must be fitted by a trained professional. We work with DuraFlex flexible liner systems for full relining and HeatShield ceramic resurfacing when the flue can be restored without a full liner. Cost varies with liner length, flue diameter, and whether insulation is added, and the written estimate sets the final price.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 246-4886

DuraFlex Flexible Relining

DuraFlex liners are flexible stainless systems that can be routed through an existing flue and sized to the appliance. They suit masonry chimneys where the old tile is damaged but the chase is still sound. We set the liner, check the connection at the top and bottom, and confirm the draft before we call it done.

HeatShield Ceramic Restoration

HeatShield is a ceramic flue-repair system that resurfaced the interior of the flue without pulling the whole liner out. It’s a repair-grade solution that goes well beyond sweeping, and it works where the tile has cracks and gaps but the flue structure is otherwise intact. When a flue is too far gone for HeatShield, we say so and explain the relining option.

Chimney Flashing Repair

Chimney Flashing Repair fixes the metal and sealant at the roofline where the chimney meets the shingles. It’s the job you need when you find water staining on the ceiling near the chimney, or when the metal has pulled away from the masonry. Flashing is where most chimney leaks in Mesquite originate, and it fails because the sealant dries and cracks under the summer sun. We check the step flashing, the counter-flashing set into the mortar joint, and the sealant, then replace or rework what’s failed. Flashing work stays in a modest range for resealing and climbs when new metal has to be fabricated and set. No repair starts without evidence you can see, and the written estimate sets the final price.

Where Leaks Actually Come From

The flashing seam, not the flue, is usually the source of a water stain near the chimney. Sealant goes first, then the metal pulls loose. We trace the leak to its actual point before recommending any work.

Step Flashing and Counter-Flashing

Step flashing weaves into the shingle courses along the chimney side. Counter-flashing is set into a cut mortar joint to shed water away from the seam. Both have to be right, or the leak returns the next time it rains.

Chimney Crown Repair

Chimney Crown Repair addresses the concrete slab on top of the chimney that sheds water away from the flue and masonry below. It’s needed when the crown has a visible crack, has crumbled at the edge, or has pulled away from the flue tile. A failed crown lets water soak into the masonry, and repeated wetting is what pushes a chimney toward bigger repair down the road. We remove loose material, form a new crown with the proper slope away from the flue, and seal the joint at the tile. Crown work falls in a modest range for standard repairs and rises with larger crowns and full replacement. The written estimate sets the final price.

Why Cracks Spread

A hairline crack in a crown will widen once water gets in and the slab goes through wet and dry cycles. Each season opens it a little more. Catching it early keeps the repair small.

Rebuilding the Slope

A crown that sits flat or slopes toward the flue is working against you. The new crown has to pitch water off the edge, not back into the chimney. We form it to shed properly and check the flue joint before we finish.

Want to talk it through?Free estimate, price agreed before work starts
Call (833) 246-4886

Chimney Repair Companies

Chimney Repair Companies vary widely in what they actually do, and choosing the right one comes down to whether they handle the full cycle or only part of it. The wrong pick is a generalist who sweeps and then tells you the repair isn’t their job. In Mesquite, you want a company that sweeps, inspects, and repairs without handing you off to a second vendor halfway through. We cover all three under one company, with one point of contact from the inspection through the repair completion. That continuity matters when a problem is found mid-sweep and you need a straight answer about what it involves. Typical repair work sits in a range that depends on the component, and the written estimate sets the final price.

Questions Worth Asking

Ask whether they do the repair work themselves or subcontract it out. Ask what happens if the sweep finds a problem, and who you’ll be dealing with from there. Ask for the findings in writing with photos.

What Full-Service Actually Means

Full-service means the sweep, the inspection, and the repair are handled by the same company with aligned records. You’re not repeating the story to a new crew on the second visit. It also means the recommendation comes from someone who saw the chimney up close, not from a call center.

Chimney Masonry Repair

Chimney Masonry Repair covers the brick and mortar work: repointing joints, replacing spalled brick, and rebuilding the top courses when they’ve gone soft. It’s the right call when mortar has receded from the joints, when brick faces are flaking, or when the chimney leans. North Texas heat and dry spells push masonry through a lot of movement, and those cycles take a toll on older chimneys around Mesquite. We remove deteriorated mortar, repack the joints with fresh material, and replace brick that’s no longer holding. When masonry work goes that far up, it also means height and ladder work, so the trained crew does it, not the homeowner. Masonry repair cost depends on the square footage and the number of courses involved, and the written estimate sets the final price.

Repointing vs. Rebuilding

Repointing means grinding out old mortar and repacking the joints, and it works when the brick itself is still sound. Rebuilding is the option when the top courses have gone soft or the crown has shifted. We look at the brick, not just the mortar, before we decide which way to go.

Brick Spalling and Water

Spalled brick has a flaking, cratered face where water got in and froze or simply expanded. Once a brick face is gone, patching the surface won’t hold. The brick gets replaced so the chimney face stays solid.

Brands We Service

We work with DuraFlex flexible liner systems and know where the stainless liner wears at the top plate and the appliance connection. We also work with Olympia Chimney components for cap and venting work, and we know the fit points that matter on masonry crowns and flue tops.

Copperfield is another brand we work with, and we know its cap and exterior component details well enough to fit them correctly the first time. Famco is a familiar name in our cap and exterior work too. Whether you have DuraFlex, Olympia Chimney, Copperfield, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 246-4886

Signs You Need a Pro Right Now

  • Water staining on the ceiling or chimney breast. This points to flashing, crown, or cap failure letting water in. Left alone, the wet masonry keeps degrading and the repair grows.
  • Crumbling mortar between the bricks. Receded joints let water into the wall of the chimney. Repointing early is a much smaller job than rebuilding later.
  • A cap that’s tilted, rusted, or missing its screen. A loose cap lets rain and animals into the flue. It’s a quick fix that protects the whole chimney.
  • Draft problems or a smoky smell when the fire isn’t lit. This can signal a blocked or damaged flue. It’s worth having it checked before the next burn.
  • Cracked or missing flue tile, visible from the top or with a camera. A damaged liner is the concern that matters most for fire and carbon monoxide. It deserves a professional look, not a guess.

Our Process, Step by Step

  1. 1
    Book the visit and talk through the symptoms. We ask what you’ve noticed and when, so the first visit targets the right component. You get a clear scope before anyone climbs up.
  2. 2
    Sweep and inspect before recommending anything. A camera inspection and photo report show the flue, crown, and flashing as they actually are. We don’t quote a repair from the ground.
  3. 3
    Review the findings with you. We show the photos, name the component that failed, and explain what fixing it involves. Where work can safely wait, we say so.
  4. 4
    Do the repair with the right materials. Liner, cap, flashing, crown, or masonry – each one gets the brand and method that fits the job. The sweep, the inspection, and the repair all come from the same company.
  5. 5
    Check the work and hand over the record. We confirm the draft, the fit, and the seal before we leave. You keep the photo record for your own files.

How Much Does Chimney Repair Cost in Mesquite?

Chimney repair in Mesquite is priced per job, and the written estimate is what sets the final number. Repair work on a cap, crown, or flashing sits in a modest range, while a full reline or masonry rebuild runs higher because of materials and the height involved. A typical cap replacement is the smallest job on the list, and a full liner installation is the largest. What moves the price is the component, the access, the material chosen, and how much of the chimney has to come apart to make the fix hold. You avoid overpaying by getting the camera inspection first and refusing any recommendation that doesn’t come with photos you can see for yourself. Every estimate is free and includes the inspection findings in writing. If the work can wait a season, we’ll tell you that too. Call (833) 246-4886 for an exact quote – estimates are free.

Our Service Area Near Mesquite

We serve homeowners across Mesquite and the surrounding towns, including Balch Springs, Seagoville, Forney, Heartland, Hutchins, Wilmer, Highland Park, and University Park. For homes near Travis Ranch, we also handle chimney repair with the same camera-first approach. Drive times vary by location, but we work to keep the visit window tight and let you know when we’re on the way. chimney repair in Balch Springs and the nearby towns gets the same written estimate and photo report.

Serving Mesquite, TX – Our Local Coverage Area

We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 246-4886

Frequently Asked Questions About Chimney Repair in Mesquite

Schedule Your Chimney Repair Service in Mesquite Today

Whether it’s a rusted cap, a cracked crown, or a liner that needs a real look, we can book the visit and give you the findings in writing. Call (833) 246-4886 for a free, no-obligation estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. You get the photos, the explanation, and the price before any repair begins.

Written by the team at Mesquite Chimney Sweep.

Why Mesquite Chooses Mesquite Chimney Sweep

We set the standard for chimney repair in Mesquite.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Mesquite

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Mesquite Customers Say

Trusted by homeowners across Mesquite and surrounding areas.

★★★★★

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

Terrence Jackson
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Ruben Vargas
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Oscar Flores

Ready for Chimney Repair in Mesquite?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Mesquite.

(833) 246-4886

Request a Free Estimate in Mesquite

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7