Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Mesquite Homeowners
A chimney inspection in Mesquite answers one question honestly: is this flue safe to use, and if not, what exactly has to change? We climb, we camera the inside, and we hand you a written report with photos so you can see what we saw. Our technicians have up to 12 years of experience, and we’ve built a strong local reputation on telling homeowners plainly what’s fine, what needs watching, and what needs fixing before the next fire. Same-day inspections are often possible when you call early. Call (833) 246-4886 to book yours.
Fireplace Inspection
Fireplace Inspection is the close-up check of the firebox, damper, smoke chamber and the first few feet of flue above the fire, and it’s the right start when you’ve just bought a house or gone a few seasons without a look. In Mesquite, where wood fires get steady use through the cooler months and gas logs run year-round in some homes, creosote and debris build quietly out of sight. We check the damper operation, look for cracked firebrick and open mortar joints, and confirm the smoke shelf is clear. A fireplace inspection typically runs $75-$150 as a standalone visit, or is bundled into a fuller inspection. The written report tells you what we found in plain terms, and the estimate sets the final price. We work with Olympia Chimney and Famco components when a damper or cap needs replacing.
Gas Log and Insert Checks
Gas fireplaces still need inspection. We look at the venting path, check for obstruction or corrosion in the flue, and confirm the damper and surround are intact. A blocked or partly collapsed vent on a gas appliance can put combustion gases into the room, which is the whole reason this check matters.
Firebox and Damper Condition
Cracked firebrick and a stiff or warped damper are common on older Mesquite homes where the fireplace has seen a lot of use. We note the severity in the report so you know whether it’s a watch item or a repair. Loose mortar in the firebox joints gets flagged before it grows into a rebuild.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole assembly – cap, crown, exterior masonry, flue interior, firebox and appliance connection – in one visit, so nothing gets checked in isolation. You need this when you’re buying or selling a home, after a chimney fire or a strong storm, or when a draft, odor or stain has you wondering. We bring cameras and lights, look at the crown and flashing from the roof, and photograph each issue. Chimney Inspection Services in Mesquite typically cost $125-$350 depending on scope; the written estimate you receive before booking is the final word on price. As a Mesquite Chimney Sweep team, we handle the sweep and any repair in the same visit when the scope allows.
Full Exterior and Interior Review
Inspection is not just a look down the flue. We check the cap for damage, the crown for cracks that let water in, the flashing where the chimney meets the roof, and the masonry for spalling. Inside, it’s the firebox, damper, smoke chamber and flue.

Home Sale and Purchase Inspections
Lenders and buyers often want documented evidence that the chimney is sound. We provide a written report with photos you can hand to the other side of the transaction. If something needs repair, the same visit produces a repair estimate.

Chimney Flue Inspection
Chimney Flue Inspection is the interior look at the flue itself – the passage the smoke actually travels – and it’s the check that catches creosote glaze, cracked liners, and gaps you’d never spot from the firebox. You need one after heavy burning seasons, whenever you move into a home with an unknown history, or if you’ve noticed a smoky smell that lingers. We lower a camera down the flue, measure the creosote level, and check the liner for cracks and separation. A flue inspection typically runs $95-$175 and often rides along with a sweep. We use HeatShield ceramic resurfacing when the flue needs restoration rather than a full liner replacement.
Creosote and Soot Assessment
Creosote builds in stages, and the sticky, glazed form is the one that matters most. We grade what’s in your flue and tell you whether a standard sweep clears it or whether it needs special treatment. That grade is the difference between “you’re fine until next season” and “this needs attention before your next fire.”
Liner Integrity Check
A cracked clay liner or a rusted-out metal one lets smoke and heat reach the framing and masonry around it. We look for cracks, missing mortar joints between tiles, and gaps at the top. If a full reline is called for, we work with DuraFlex flexible liner systems for the job.
Chimney Fire
Chimney Fire is what happens when creosote or soot inside the flue ignites, and even a small one can crack liners and damage the chimney’s structure without the homeowner realizing it happened. You need an inspection promptly after any chimney fire, and also after a new smell or a stain that shows up following heavy burning. We inspect the flue, firebox and any visible structural components, and photograph the damage we find. Repair needs vary; a post-fire inspection typically runs $150-$350, and any restoration work (HeatShield resurfacing or relining) is quoted separately from the written estimate. Never assume a chimney fire that put itself out left the flue safe. Call us to book the inspection.
Warning Signs After a Fire
A loud roaring or popping from the flue, a puff of black smoke into the room, or stains at the top of the firebox are signs worth taking seriously. Damage can be hidden behind intact-looking tile. An inspection shows the inside.
Post-Fire Repair Options
Sometimes the flue needs only cleaning and a patch where the tile cracked. Other times the liner is compromised enough that HeatShield resurfacing or a new DuraFlex liner is the safe path. Either way, we explain the options before any work is booked.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the thorough check that goes beyond what’s visible from the firebox: the full flue, the attic and crawlspace where accessible, the exterior, and the appliance connections, all documented with a camera and photos. It’s typically required when you buy or sell a home, after a chimney fire or earthquake, after a change to the appliance or fuel type, or when a Level 1 look has turned up a concern. In Mesquite, that often means a house sale, a new insert, or a chimney that’s been dormant for years. Level 2 inspections typically run $200-$400 depending on access and flue configuration, and our report gives you photos for the record. The written estimate sets the final price.
When a Level 2 Is Required
Home sales, appliance changes and post-fire checks are the usual triggers. A Level 2 also makes sense when you’ve moved into a home with no chimney history. It gives you a documented baseline you can compare against later.
What the Report Includes
Every photo is labeled with what it shows and where it sits in the chimney. Findings are ranked from cosmetic to repair-needed. You’ll also see a repair estimate for anything that can’t safely wait, so you’re not left guessing what “needs attention” means.
Chimney Leak
Chimney Leak is water showing up where it shouldn’t – a damp stain on the ceiling or wall near the chimney, rust down the flue, or water in the firebox – and the cause is usually at the roof, not the flue itself. You need an inspection when you spot a stain, smell a musty odor after rain, or notice water pooling in the firebox after a storm. In Mesquite’s heavy spring and fall rains, a cracked crown, failed flashing, or a missing cap lets water in steadily. Our cameras check the flue for rust, and we look at the crown, cap and flashing from the roof. A leak inspection typically runs $125-$250, and any repair (crown work, flashing, cap replacement with an Olympia Chimney or Famco component) gets a separate written estimate. Catch it early and the repair stays small.
Locating the Source
We start at the top: crown condition, cap, and flashing where the chimney meets the roof. From there, we trace water paths down the masonry and check the flue for rust streaks. That sequence usually finds the source on the first visit.
Crown and Cap Repairs
A cracked crown lets water into the masonry from above, and a missing or damaged cap lets rain straight into the flue. Both are fixable, and both prevent far bigger problems if handled early. The right part and a proper seal matter more than speed.
Chimney Camera Inspection
Chimney Camera Inspection uses a video camera lowered down the flue so you and the technician see the same thing on the screen – no assumptions, no guesswork about hidden damage. You need one whenever a standard inspection can’t confirm the flue’s condition: hidden cracks, offset flue tiles, or a liner that looks fine from the firebox but isn’t. In Mesquite, older homes with original clay tile flues are the usual candidates. A camera inspection typically runs $95-$200 and often comes as part of a Level 2. We record what we see so you have proof of condition before decisions get made. Call to schedule.
What the Camera Reveals
Cracked tiles, missing mortar joints, gaps at offsets, creosote glazing, and debris are all visible on the screen. What looks intact from below can be compromised three feet up. Seeing it is the only way to make an informed call.
Recording and Reviewing the Findings
We walk through the footage with you and point out what matters and what doesn’t. Anything that needs repair gets a separate written estimate with the work described. It’s your record of the flue’s condition at that date.
Brands We Service
We work with a defined set of professional chimney brands because parts quality matters as much as the labor. HeatShield is our choice for ceramic flue resurfacing when the liner can be restored rather than replaced, and we’re experienced with how it applies inside a working flue. DuraFlex flexible liner systems come into play when a full reline is the right answer, and we know how they wear and where the connections fail. Olympia Chimney and Famco components handle caps, venting and exterior chimney parts.
Copperfield and Gelco round out the lineup for the stainless and cap work we run into most in Mesquite homes. We name the brands we use because you should know what’s going on your chimney. Whether you have Olympia Chimney, Famco, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
Some chimney symptoms can wait a season. These are the ones we’d rather you not sit on.
- Creosote glaze in the flue. Sticky, tar-like creosote is the most flammable grade and can ignite under normal use. A camera check tells you the grade before your next fire.
- Smoke backing into the room. Poor draft usually means an obstruction, a damaged flue, or a smoke chamber problem. It’s a sign the flue isn’t doing its job, and it’s fixable.
- Water stains or rust near the chimney. That’s a leak, and it’s often at the crown or flashing. Left alone, water damages masonry and the liner.
- A firebox crack or loose firebrick. The firebox is the barrier between the fire and the framing. Damage there means the fireplace should not be used until inspected.
- A chimney fire you suspect but didn’t see. Loud roaring, a puff of black smoke, or a smell that stays after burning are all worth an inspection. The flue can look intact and still be compromised.
Our Process, Step by Step
- 1
Book and confirm the scope. We ask the right questions up front – what you burn, when you last had the chimney looked at, and what prompted the call. That determines whether you need a Level 1, 2, or a camera-first inspection.
- 2
Protect the room. Drop cloths go down before anything else happens. A chimney visit shouldn’t leave a mess in the living room.
- 3
Sweep and inspect from the firebox up. We remove the creosote and soot first so the inspection sees the liner’s actual surface, then work the camera up the flue. Every finding gets photographed.
- 4
Check the exterior and roof. Crown, cap, flashing, and masonry are checked from the roof. That’s where most leaks and damage start, and it’s where a firebox-only look would miss them.
- 5
Walk you through the findings. You see the photos, hear what’s fine and what isn’t, and get a written estimate for anything that needs repair. Nothing is booked without your go-ahead.
How Much Does Chimney Inspection Cost in Mesquite?
Chimney inspection cost in Mesquite depends on how deep the look needs to go. A typical basic inspection (firebox, damper, and visible flue) runs $75-$150. A Level 2 inspection, with camera and photos, runs $200-$400. A targeted camera inspection of the flue alone runs $95-$200. A leak investigation typically runs $125-$250. A post-chimney-fire check runs $150-$350 for the inspection, before any repair is quoted.
What moves the price: the flue configuration (offset flues and multiple flues take longer), roof access, the length of the flue, and how much creosote has to come out before we can see. Homes with unusual construction, like an exterior chimney or a converted gas insert, take more time to check properly.
How to avoid overpaying: ask what level of inspection you’re getting and whether a camera is included, ask for a written estimate before booking, and ask for the report with photos so you can see what needs fixing. Don’t accept a “you need a whole new liner” without seeing the evidence on camera.
What’s included in a free estimate: an honest walk-through of what we found, the photos, and a written estimate for any repair. The written estimate sets the final price. There’s no service-call fee hidden in there. Call (833) 246-4886 for an exact quote – estimates are free.
Our Service Area Near Mesquite
We work all over Mesquite, and we also cover nearby communities including Balch Springs, Travis Ranch, Seagoville, Forney, Heartland, Hutchins, Wilmer, Highland Park and University Park. Response times vary with the day, and same-day bookings are often available when you call early. Call (833) 246-4886 to check the next opening.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Mesquite
A chimney inspection is a look at the full chimney system – firebox, damper, flue, and the exterior and structure where accessible – to determine whether it’s safe to use. It’s not the same as a sweep: sweeping removes creosote and soot, while an inspection tells you what condition the flue and structure are in. We do both, which means you’re not handed off between vendors. Call (833) 246-4886 to book an inspection – estimates are free.
A basic inspection takes about 45 minutes to an hour; a Level 2 with camera work typically takes 1 to 2 hours. The extra time goes on roof access and working the camera up the flue. Allow a little margin if the chimney has multiple flues or unusual construction. Call us with a description of your chimney and we’ll tell you what to expect.
Inspections typically run $75-$150 for a basic check, $200-$400 for a Level 2 with camera, and $95-$200 for a targeted camera inspection of the flue. The written estimate sets the final price, so you know the cost before we start. Call (833) 246-4886 for an exact quote – estimates are free.
Yes. We work with Olympia Chimney and Famco for caps, venting and exterior chimney components, and we know where those parts wear out over time. We also handle DuraFlex liner systems and HeatShield ceramic resurfacing. If your chimney is another make, we can still inspect and advise on it.
Same-day inspections are often possible when you call early in the day. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturdays, but a call outside those hours is booked into the next opening. Call (833) 246-4886 to check availability.
We stand behind the work we perform and the parts we install, and we work with you on any issue after a job. We don’t make claims we can’t back up: ask about coverage for your specific repair when you get the written estimate. That’s the right time to ask, and we’ll tell you exactly what applies. Call (833) 246-4886 with questions.
Clear the area around the fireplace and hearth, move any furniture or decor that would block access, and know when you last had the chimney swept. If you have a gas insert, make sure it’s turned off before we arrive. Have a photo of the chimney from the roof if you have one – it helps us plan. Call (833) 246-4886 to book.
Schedule Your Chimney Inspection Service in Mesquite Today
One call covers the sweep, the inspection, and any repair you decide to do – handled by one team. Call (833) 246-4886 to schedule a chimney inspection in Mesquite. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and comes with photos of what we find, so you’re making decisions on evidence, not guesswork. Nothing gets recommended that you can’t see for yourself.
Written by the team at Mesquite Chimney Sweep.