Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Forney
Forney is growing fast, and most of the chimneys here are young. That changes the job. A chimney sweep in Forney is less about hauling out decades of soot and more about verifying that a builder-grade fireplace was installed correctly, that hail hasn’t opened a crack in the cap or crown, and that the first few years of occasional burns haven’t left glazed creosote sitting in the smoke chamber. We work with homeowners across Forney, from the new subdivisions off the US-80 corridor to the older ranch houses near the original town center, and we treat a newer chimney with the same documentation standard as an old one. Our technicians have up to 12 years of experience, and we tell you exactly what we found, what it means, and what fixing it involves.
Call (833) 246-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Forney Homeowners Call Mesquite Chimney Sweep for Chimney Sweep
Forney sits east of Mesquite along US-80, and we know the drive and the housing well enough to arrive prepared. Most of what we see in Forney is 2000s to 2020s subdivision construction: brick veneer, manufactured stone, factory-built fireplaces and direct-vent units. That’s a different animal from the open-hearth fireplaces in the farmhouses and ranch homes scattered nearer the old town center. We bring the right tools for both.
Local reputation in Forney comes down to one thing: telling people the truth about what their chimney needs and what can safely wait. We don’t hand off between vendors mid-problem. One call covers the sweep, the inspection, and the repair. Our work in Forney gets talked about at the neighborhood level, and that’s the reputation we protect.
Forney is close enough that scheduling a visit is straightforward, and customers in Travis Ranch and Heartland are on familiar ground for us. If you’ve recently bought a home here and have no record of the last inspection, that’s the most common reason people call.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Forney
Fireplace Cleaning in Forney most often starts with a factory-built or masonry fireplace that’s only seen light, occasional use, and the job is as much inspection as brush work. We run a Level 1 inspection, brush the flue liner, check the damper and firebox gaskets, and look hard at the cap and crown. A typical fireplace cleaning in Forney runs $150 to $290. When a chimney has sat through a season of sporadic burns, the soot and creosote don’t always brush out cleanly, and we’ll tell you if a rotary or chemical step is needed.
What the brush-and-vac actually covers
We brush the flue, vacuum the firebox and smoke chamber, and clear debris from the chase pan. It’s a cleaning, but it’s also our chance to see the parts of the system you can’t reach from the hearth.
When a Forney fireplace needs more than a sweep
If creosote has glazed into tar streaks, or the smoke chamber shows buildup a brush won’t touch, we step up to rotary or chemical removal. Better to know now than after a chimney fire.
Chimney Services in Forney
Chimney Services in Forney cover the whole cycle: sweeping, inspection, and repair, handled by one team so you aren’t passed between vendors. A Level 1 inspection in Forney generally runs $125 to $225 and a Level 2 runs $225 to $450. Creosote removal starts around $200 and climbs with severity, and soot removal typically lands between $100 and $200. What you get is a written record: clearances documented, photos of anything questionable, and a plain explanation of what’s urgent versus what can wait.
Inspection documentation for builder-grade installs
Many Forney fireplaces went in with minimal clearance paperwork. A proper Level 1 inspection turns that into an actual record, which matters when you sell or when something goes wrong.

Repair work that follows the sweep
Caps, crowns, and chase covers are common repairs here. We use HeatShield for flue restoration and DuraFlex for relining when a liner is beyond cleaning.

Trusted Brands We Service in Forney
We name the brands we use because materials matter as much as labor. Our work in Forney draws on professional-grade components: DuraFlex flexible liner systems for relining, HeatShield ceramic flue repair for restoring a damaged flue without full replacement, Olympia Chimney for caps and venting, and Gelco among the materials we’re experienced with. We don’t claim to stock parts locally or run a warehouse, but we know these products and can source what your job needs without turning a simple cap replacement into a weeks-long wait. That’s the difference between a generalist and a chimney specialist.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Forney Homes
- Hail-damaged caps and crowns. Forney’s new-build subdivisions sit in a hail corridor, and the same storms that dent roofs crack chimney caps. A cracked crown lets water into the chase, and it’s easy to mistake the rust that follows for normal wear on a young house.
- Sporadic burns, glazed creosote. North Texas winters are short, so many Forney fireplaces only burn during hard freezes. That gap lets first-degree creosote glaze undisturbed between seasons, and a quick brush misses the tar in the smoke chamber.
- Builder-grade clearance gaps. Factory-built direct-vent units often go in with thin clearance documentation. Small gaps go unnoticed until someone actually inspects and records the clearances.
- Third-degree creosote in old farmhouses. The original open-hearth fireplaces along the US-80 corridor carry decades of buildup that a standard sweep can’t remove without a rotary or chemical step.
Pricing for Chimney Sweep in Forney, TX
Pricing in Forney is per job, set by a free written estimate before any work begins. A standard chimney sweep and Level 1 inspection typically runs $175 to $320. Creosote removal ranges from $200 to $500 depending on how glazed it’s gotten. Cap and crown repair generally falls between $250 and $650. Relining with a DuraFlex system is a larger job, usually $2,000 to $4,500 or more depending on liner length and material. What moves the number: how much buildup there is, whether the cap or crown needs work, and whether the flue needs HeatShield restoration. Our technicians have up to 12 years of experience, and nothing gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Forney
Forney is one of several communities we serve east of Mesquite. We also work in nearby Travis Ranch and Heartland, and out toward Seagoville and Balch Springs. The housing stock shifts as you move between them, but the standard stays the same: sweep, inspect, document, and fix what actually needs fixing. If you’re in any of these areas, the same one-team approach applies.
Serving Forney, TX – Our Local Coverage Area
We serve Forney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Forney
Because “looks new” and “is safe” aren’t the same thing, and a sweep is also your first inspection record. In Forney’s newer subdivisions, factory-built fireplaces often go in with minimal clearance documentation, and the occasional burns during hard freezes still leave soot and glazed creosote. A Level 1 inspection confirms clearances and catches hail damage to the cap before water gets in. Call (833) 246-4886 for a free estimate.
Yes, and it’s one of the most common things we find here. Forney sits in a hail corridor, and the same storms that damage roofs crack chimney caps and floors crowns. A cracked crown lets water into the chase, which rusts the firebox and spalls the chase over time. Call (833) 246-4886 to get your cap inspected.
First-degree creosote is light and flaky and brushes off easily; third-degree is glazed, tar-like, and needs rotary or chemical removal because a standard brush won’t touch it. Because Forney fireplaces burn sporadically, first-degree buildup often sits and glazes between freezes, and older open-hearth fireplaces near the US-80 corridor commonly carry third-degree creosote. Call (833) 246-4886 to find out which you have.
Once a year, even with light use. North Texas winters are short, so creosote and soot sit between burns and glaze undisturbed, and annual inspection catches hail damage and clearance issues before they become repairs. Call (833) 246-4886 to schedule.
Usually not. Open-hearth fireplaces carry decades of buildup, and third-degree creosote there needs a rotary or chemical step a standard sweep can’t handle. We assess with a camera first, then tell you what’s required. Call (833) 246-4886 for a free estimate.
If you’re in Forney and want to know what’s actually going on in your chimney, call (833) 246-4886 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One call covers the sweep, the inspection, and the repair, and nothing gets recommended without evidence you can see for yourself.
Written by the team at Mesquite Chimney Sweep.