Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Travis Ranch
Travis Ranch chimneys fail in ways that surprise people. This is a master-planned Kaufman County community where nearly every home went up in the 2000s or later, so the work here is rarely about old creosote-choked masonry. It’s about factory-built fireplaces in exterior chases, builder-grade components, and storm damage that shows up on the roof long before it shows up at the hearth. We know these homes, we know how their chimneys are put together, and we know what to look for when something’s wrong. Call (833) 246-4886 for a free estimate, and we’ll tell you exactly what we find and what fixing it involves.
Why Travis Ranch Homeowners Call Mesquite Chimney Sweep for Chimney Repair
We’re a chimney specialist, not a generalist handyman with a brush. Everything we do is chimney work: sweeping, inspection, and repair, handled by one accountable team. For Travis Ranch homeowners, that means one call covers the whole job rather than handing you off between a sweep company and a mason who never talks to each other.
The materials matter as much as the labor, and we name the brands we use. We work with an industry-vetted lineup – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – so a repointing job, a crown repair, or a liner match uses a part that’s actually specified for the unit, not a big-box substitute that half-fits. For flue restoration we use the HeatShield ceramic system, which can resurface a damaged flue without a full reline. For a full reline, DuraFlex flexible liner systems are in our toolkit. Our technicians have up to 12 years of experience reading Travis Ranch’s prefabricated chases and factory fireboxes.
And we tell you what we found, what it means, and what the fix involves, in plain terms, with a written estimate that sets the final price. That’s the standard we hold to across Travis Ranch, whether you’re near the community center off FM 740 or further out toward the county line.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Crown Repair in Travis Ranch
Chimney Crown Repair in Travis Ranch usually starts on the roof, not at the firebox, because most of these homes have a prefabricated crown at the top of an exterior chase rather than a poured masonry crown on a tall brick stack. The crown is the concrete or metal cap at the very top that sheds water away from the flue; when it cracks, chips, or lifts, rain gets in and the first place it shows up is the damper and firebox. A typical crown repair runs $250 to $650 depending on whether the top needs resealing, resurfacing, or a full replacement.
Sealing and Resurfacing
For a crown that’s intact but aging, the fix is usually a cleaning and a flexible sealer or patch material rated for the job. That keeps water out without tearing off the top. We check the chase cover underneath at the same time, since a crown that looks fine can be hiding a loose cover joint.
Replacement on a Failed Top
When the crown is cracked through or pulling away from the chase, it needs to come off and be replaced so the new top sheds water the way the original was supposed to. A replacement crown is matched to the chimney’s dimensions and the flue opening so it sits flush. You get a photo of the old one and the new one, so you can see what changed.
Chimney Repair Companies in Travis Ranch
Chimney Repair Companies in Travis Ranch are asked to do one thing over and over: figure out why a newer chimney isn’t working right when nothing on it looks old. The answer is usually on the outside. Exterior chimney chases here are clad in the same brick veneer as the house, so storm damage hides behind the siding line – a loose or missing chase cover, a cap that’s been dented or peeled back by hail, flashing that’s pulled away after a high-wind event. Those let water into the firebox and rust the damper, and none of it shows at the hearth. A repair visit typically runs $350 to $1,800 depending on what’s wrong, and a rebuild of a badly damaged chase cover or crown can run $1,200 to $3,500.
What a Repair Call Covers
A qualified technician typically starts with a Level 2 inspection of the flue liner and smoke chamber, then checks the chase cover, chimney cap, and flashing for storm damage. If builder-grade components have failed, they get resealed or replaced with parts matched to the unit’s manufacturer – DuraFlex or Olympia Chimney liners and Famco or Gelco caps are common matches. If the firebox has never been used, construction debris from the original build often has to come out before it’s safe to burn.
Matching Parts to the Unit
A factory-built fireplace is an engineered assembly, and its liner, damper, and cap are listed for that specific make and model. A universal part that “sort of” fits will not draft or seal the way the unit was built to. We match components to the manufacturer so the assembly works as designed.
Trusted Brands We Service in Travis Ranch
We work with professional-grade chimney brands because a repair is only as good as the part going in. For relining, DuraFlex flexible liner systems are on our list. For caps and venting, we’re experienced with Olympia Chimney and Famco products. For flue restoration without a full reline, HeatShield’s ceramic resurfacing system does the job. We don’t claim to stock every part, but we know these product lines and can source the right component for your specific fireplace or chase. That means a faster turnaround than a shop ordering blind for a unit it’s never seen, and a part you can actually verify against your own manual.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Travis Ranch Homes
- Hail-dented or wind-lifted chase covers and caps. North Texas hail and high-wind storms routinely beat up the covers on exterior chases here. When the cover lifts or dents, water gets into the firebox and rusts the damper, and the damage never shows until you look at the roof.
- Construction debris left by the original builder. A first-ever cleaning on a never-burned fireplace often turns up leftover material in the firebox from the build. It has to come out before the fireplace is safe to use.
- Mismatched builder-grade components. A flue liner or damper swapped for a part that doesn’t match the unit’s listed manufacturer can leave the assembly barely drafting or sealing. We match replacements to the make and model.
- Water staining and rust after a storm. If you see a stain in the firebox or rust on the damper, the cause is almost always a failed cover, cap, or flashing above. It’s a roof-side fix, not a firebox-side one.
There’s one local condition that’s specific to this community. Travis Ranch homes sit in a newer subdivision where fireplaces go idle for months through hot, humid summers, then get heavy first-fire use when a cold snap hits. That pattern, combined with storm damage to the chase tops, makes an annual check worth more than the soot it removes. In a subdivision this new, our technicians often find the original builder’s construction debris or a loose chase cover on the very first visit. The most common off-season call here is a cap or crown dented by hail, not a soot-clogged flue.
Pricing for Chimney Repair in Travis Ranch, TX
We won’t quote a repair blind. A typical line-item in Travis Ranch runs like this: crown repair $250 to $650; chase cover or cap replacement $300 to $900; flashing repair $250 to $700; repointing or tuckpointing $400 to $1,200; waterproofing $250 to $600; and a partial rebuild or major chase repair $1,200 to $3,500. What moves the number is what’s actually wrong, how much of it is storm damage versus wear, and whether the parts have to be matched to a specific manufacturer. A written estimate sets the final price, and if the work can safely wait, we tell you that too. Estimates are free, and you see the photos before anything is approved.
We Also Serve Cities Near Travis Ranch
Travis Ranch sits in fast-growing Kaufman County, and we also take chimney repair calls in Forney, Heartland, Seagoville, and Balch Springs. The housing mix is similar, and the same storm patterns hit the whole area. Our chimney repair team covers structural repair, repointing, waterproofing, and relining across all of these. If you’re not sure whether your address counts, just ask.
Serving Travis Ranch, TX – Our Local Coverage Area
We serve Travis Ranch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Travis Ranch
Yes. A never-burned fireplace still needs a Level 1 inspection before first use, because builders often leave debris in the firebox and builder-grade components can be loose or missing from the start. We check the flue, the firebox, and the chase top, then clear anything that shouldn’t be there. Call (833) 246-4886 to book an inspection – estimates are free.
Because a factory-built fireplace is an engineered assembly, and its liner, damper, and cap are listed for that specific make and model. A universal part that doesn’t match the unit’s listed manufacturer can leave the assembly unable to draft or seal correctly. We match replacements to your manual – DuraFlex or Olympia Chimney liners and Famco or Gelco caps are common fits. Call (833) 246-4886 and we’ll tell you what your unit calls for.
On these homes, hail damage usually shows up as a dented or lifted chase cover or cap on the exterior chase, not as anything visible at the hearth. The first clue inside is water staining in the firebox or rust on the damper. We inspect the roof side and photograph what we find. Call (833) 246-4886 for a free estimate.
Less so than in older masonry, but it’s still a concern. Here the bigger issues are idle months followed by heavy first-fire use, and storm damage to the chase top – not decades of creosote buildup. A wood-burning insert or a working factory fireplace still benefits from an annual sweep. Call (833) 246-4886 to schedule one.
A Level 1 covers a routine annual visual check of accessible parts. A Level 2 adds a video scan of the flue liner and smoke chamber, and it’s what you need after a storm, a change of fuel type, or a first-time-use call. In Travis Ranch, storm damage to the chase often calls for a Level 2. We’ll tell you which one fits your situation – call (833) 246-4886 for a free estimate.
Ready to get your chimney checked or repaired? Call (833) 246-4886 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One call covers the sweep, the inspection, and the repair, so you can stop guessing what’s going on with your chimney and get a straight answer, with the photos to back it up.
Written by the team at Mesquite Chimney Sweep.