Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Mesquite, TX
We provide independent Gelco service across Mesquite, from sweeping and creosote removal to Level 2 inspection and repair. What sets our Gelco work apart here is brand-specific knowledge: we know how Gelco prefab and masonry components for the Model 10/20 HT series age in North Texas heat, and we know what Mesquite’s clay soil does to the vent chases those systems sit in. We’re not affiliated with, authorized by, or endorsed by Gelco; we’re an independent shop that works on their products regularly. One call covers the sweep, the inspection, and the repair, so you’re not handed off between vendors. Call (833) 246-4886 to book.

Why Mesquite Residents Choose Us for Gelco Service
Gelco systems have particular habits. Their metal flue sections don’t fail the way a generic brush-and-go sweep expects them to, and when somebody treats a Gelco prefab like any other fireplace, the real problem gets missed. We run into the same things in Mesquite repeatedly: prefab fireplace dampers that won’t move after a long idle summer, spark arrestors burned through by years of sporadic burning, and vent sections that have pulled apart at the joints where the clay soil under a 1970s-90s brick home has shifted.
We name the brands we use because materials matter as much as labor. That includes Gelco replacement components sized and listed to match your existing system, along with our ability to work on the rest of the chimney cycle in-house. We work with Gelco, DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield. Our technicians have up to 12 years of experience, and they’ve spent plenty of it on Gelco units in subdivisions around Town East and Mesquite High. Scheduling is straightforward: we tell you what we found, what it means, and what fixing it involves. Call (833) 246-4886 and we’ll get you on the books.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Mesquite
Here’s what we actually find on Gelco systems in this part of the Metroplex, and why it matters for your chimney.
- Corroded flue sections with pinhole leaks. Decades of sporadic burning followed by humid summer shutdowns is hard on Gelco metal flue walls. The moisture sits, the steel starts to pit, and by the time you see a rust streak on the chase, there’s often a leak path nobody noticed. Long idle summers in Mesquite give that corrosion plenty of time to work.
- Failed or stuck dampers in prefab fireplaces. A damper that hasn’t moved since last spring can seize outright. These turn up most often during pre-sale Level 2 inspections, when a buyer’s inspector opens the firebox and finds the damper frozen open or shut.
- Disconnected or misaligned vent sections behind the firebox. Older Gelco installs are especially prone to this where Mesquite’s clay soil has moved and stressed the chase. A joint that was snug when the house was built can pull loose over a few decades of shrink-swell.
- Deteriorated caps and spark arrestors. A rusted-out or loose Gelco cap lets birds straight into the flue. This is a big one in converted Mesquite fireplaces where the flue has been abandoned for years and nobody’s checked the top of the chimney.
- Abandoned flues full of nests and debris. In homes where the fireplace was sealed or switched to gas logs long ago, the flue becomes a bird hotel. We clear it, verify the damper and cap, and get the system verified before the first cold snap.
Gelco Service in Mesquite: What Local Conditions Mean for Your Equipment
There’s one local pattern that shows up on Gelco systems in Mesquite more than most homeowners expect. Because so many Gelco chimney chases here were built into brick-veneer walls during the 1970s through the 1990s, and because the region’s clay soils shift seasonally, we routinely find vent sections that have separated or pulled loose at the joints. It’s a soil and construction-age problem. A chase that was tight when a home near Mesquite High was framed forty years ago can open a gap at a flue joint after enough wet-and-dry cycles, and that gap lets combustion byproducts into wall cavities or attic space instead of up the flue.
That’s why a brand-aware inspection matters here. A generic sweep checks for creosote and moves on. We check joint integrity, damper travel, cap condition, and the whole vent path, because in Mesquite the failure that actually matters is often the one behind the firebox rather than inside it. If the joints show movement, we recommend a Level 2 inspection with a camera so you can see exactly what we see. Nothing gets recommended without evidence you can look at yourself.
Gelco Models & Products We Service in Mesquite
We work on Gelco prefabricated metal chimney systems, including the Model 10/20 HT series, Gelco direct-vent gas fireplace venting kits, and Gelco masonry fireplace accessories and caps. Each system has its own fit and listing requirements, which is why we’re careful about parts.
When your system is a current or recently discontinued Gelco model, we use genuine Gelco replacement components to preserve fit and venting performance. For obsolete parts, we’ll use high-quality aftermarket equivalents that meet the same listing and dimensions. We don’t stock or order OEM parts as a dealer; we source what fits. For isolated failures, repair is usually the right call. When the flue liner or firebox is compromised beyond safe patching, replacing the affected section is the honest recommendation. Professional-grade parts, not big-box substitutes, is the standard we hold.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Mesquite
Every price is set per job by a free written estimate, so what you pay depends on what we find when we get there. What drives the number: whether the system needs a standard sweep or a full Level 2 inspection with camera, how much creosote has built up after years of sporadic burning, and whether vent joints have separated and need repair. A stuck damper or a bird nest removal is a different job from a section replacement.

Our estimate is free and written, and it names the work. You’ll know what the sweep, inspection, or repair involves before any of it starts. If something can safely wait until next season, we’ll tell you that too. Call (833) 246-4886 for a free estimate on your Gelco system in Mesquite.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Mesquite
A Level 2 inspection is the right call before selling a fireplace that’s sat unused, especially on a Gelco prefab where clay-soil movement may have stressed the vent joints. A Level 2 includes camera inspection of the flue and gives a buyer documented proof the chimney is safe. Call (833) 246-4886 to book one.
Not unless the fireplace was designed and listed for both fuels. Many gas log conversions leave a wood-burning firebox unsuitable for wood without modification, and the abandoned flue often fills with nests and debris in the meantime. We verify the damper, cap, and flue before anyone lights a fire. Call (833) 246-4886 and we’ll check yours.
The cap takes the worst of the weather, and in Mesquite’s long hot summers the metal can fail faster than the rest of the system. Loose caps often trace to a degraded mount or a decorative shroud that’s pulled free. We replace Gelco caps and spark arrestors with parts sized to fit. Call (833) 246-4886 for an exact quote.
Once a year is the standard for a wood-burning fireplace, and Mesquite’s sporadic burning pattern makes the annual sweep more important, not less. Long idle periods let creosote and debris build up between seasons. We sweep, inspect, and clear the whole flue in one visit. Call (833) 246-4886 to get on the schedule.
Small cracks can sometimes be repaired with HeatShield ceramic resurfacing, but a firebox that’s structurally compromised needs section replacement. We photograph what we find and explain both options so you can decide with evidence. Call (833) 246-4886 for a free estimate.
Service Areas Near Mesquite
We also serve homeowners in Mesquite and the surrounding communities, including Balch Springs, Seagoville, Travis Ranch, Forney, and Heartland. If you’re in one of these areas and have a Gelco system that needs attention, call (833) 246-4886 and we’ll get you scheduled.
Book Your Gelco Service in Mesquite Today
Whether you’re prepping for a home sale, clearing a chimney that’s sat idle for years, or finally dealing with that smoke rolling into the room, we’ll take a look, tell you what we found, and quote the work in writing. Our free estimate is the starting point. Call (833) 246-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Mesquite Chimney Sweep.